Sunday, May 24, 2020

Filippo Brunelleschi

Filippo Brunelleschi by Luigi Pampaloni, Piazza del Duomo, Florence

Filippo Brunelleschi by Luigi Pampaloni, 1830
Piazza del Duomo
Florence
Florence, December 2019

“A circular masonry dome can be built without supports, called centering, because each course of bricks is a horizontal arch that resists compression. In Florence, the octagonal inner dome was thick enough for an imaginary circle to be embedded in it at each level, a feature that would hold the dome up eventually, but could not hold the bricks in place while the mortar was still wet. Brunelleschi used a herringbone brick pattern to transfer the weight of the freshly laid bricks to the nearest vertical ribs of the non-circular dome. The outer dome was not thick enough to contain embedded horizontal circles, being only 60 centimetres (2 ft) thick at the base and 30 centimetres (1 ft) thick at the top. To create such circles, Brunelleschi thickened the outer dome at the inside of its corners at nine different elevations, creating nine masonry rings, which can be observed today from the space between the two domes. To counteract hoop stress, the outer dome relies entirely on its attachment to the inner dome and has no embedded chains.” (Florence Cathedral, Wikipedia)

No comments:

Post a Comment